Skip to content
Converters Tools

Data size converter

Pick two data units and type a number.

  • Free, no sign-up
  • Sources checked Oct 2026
  • Runs in your browser

The answer updates as you type.

1 megabyte =

0.001GB

Formula: GB = MB ÷ 1,000

Show the steps
  1. Definition: 1 MB = 10⁶ B = 1 000 000 B; 1 GB = 10⁹ B
  2. 1 MB ÷ 1,000 = 0.001 GB

Definitions used: 1 MB = 10⁶ B = 1 000 000 B; 1 GB = 10⁹ B.

Source: NIST, Prefixes for binary multiples, checked on .

1 megabyte in every data unit

1 megabytes converted to each unit of data
UnitValue
Bits (bit)8,000,000
Bytes (B)1,000,000
Kilobytes (kB)1,000
Gigabytes (GB)0.001
Terabytes (TB)0.000001
Kibibytes (KiB)976.563
Mebibytes (MiB)0.953674
Gibibytes (GiB)0.000931323
Tebibytes (TiB)0.000000909495

The table follows the amount and the “From” unit you set in the converter above.

How each data unit is defined

These are the definitions the converter uses, as written in the source next to each one. Nothing is rounded before the calculation.

Definitions of data units
UnitDefinitionIn bytes
Bit (bit)8 bits = 1 byteNot confirmed: The NIST page we opened does not state the size of a byte. 1 byte = 8 bits is the usual convention (ISO/IEC 80000-13), not confirmed in a source we opened.0.125
Byte (B)Base unit used here for data size1
Kilobyte (kB)1 kB = 10³ B = 1000 B1,000
Megabyte (MB)1 MB = 10⁶ B = 1 000 000 B1,000,000
Gigabyte (GB)1 GB = 10⁹ B1,000,000,000
Terabyte (TB)1 TB = 10¹² B1,000,000,000,000
Kibibyte (KiB)1 KiB = 2¹⁰ B = 1024 B1,024
Mebibyte (MiB)1 MiB = 2²⁰ B = 1 048 576 B1,048,576
Gibibyte (GiB)1 GiB = 2³⁰ B = 1 073 741 824 B1,073,741,824
Tebibyte (TiB)1 TiB = 2⁴⁰ B1,099,511,627,776

Data conversion questions

What is the difference between GB and GiB?

1 GB is 10⁹ bytes (1,000,000,000). 1 GiB is 2³⁰ bytes (1,073,741,824), about 7.4% more. The binary prefixes kibi, mebi, gibi and tebi were adopted by the IEC to end the ambiguity.

How many MB are in a GB?

1,000 MB in 1 GB. In binary units, 1,024 MiB in 1 GiB.

How many bits are in a byte?

Eight, by the usual convention. The NIST page we cite for prefixes does not state it, so this site marks the bit as not confirmed in a source we opened.

Sources and limits

  • NIST, Prefixes for binary multiples

    IEC 60027-2 (second edition, 2000-11), as described by NIST in “Prefixes for binary multiples”.

    National Institute of Standards and Technology. Edition or effective date: . Text in force when checked on .

This is a calculation aid, not an official measurement service. Results are rounded to 6 significant digits for display. For trade, engineering, medical dosing or legal documents, confirm the figure in the official source. Nothing you type leaves your browser.